Hey folks: I’m trying to judge the cost of doing a bunch of DIY bass traps and broadband absorbers out of OC703. I'm not...

Lights

I am updating my studio. I put 2 GIK Monster traps on the front wall. I added 2 more inches using wood bars to get more airspace...

passionmax

I’m building my own Soffit Bass Traps. What’s material should I use They will be 15” x 15” and 8 feet tall. I keep...

passionmax

I build some basstraps using Ikea Billy shelfs, filled with Rockwool. I am not much of a "builder", so i didn´t want...

adl

I see GIK acoustics have Turbo Traps. Are these tube traps better at controlling bass then the soffit traps in the lower...

passionmax

Hello, I just bought some B4 Bass Traps from Gik and need to mount them in the corners of my studio, which are completely flat...

musicinla

hi everyone, i already posted that question in another topic not long ago, but i haven't had any answer, so i thought i might...

amaurythewarrior

Something like this https://www.ebay.co.uk/itm/184554976659#LISTING_FRAME_MODULE This dude does not answer any messages,...

keenly

I want to build some basstraps using ikea shelfs and it basically comes down to two options: Billy or Gersby shelf. Billy would...

adl

Hello audio people, Long time lurker, first time poster here. I've got a great basement studio setup, but there's one glaring...

Pagonys

I've got a little 100-140Hz issue it seems tube traps would be spot on to fix (to clarify, I have floor to ceiling corner traps...

JCorbett

Hello! I was thinking of chopping up some wood and attaching it to my door, mostly for decoration/vibes, but I figured I'd...

antiwebbite

Hi All, Does anyone have any information on Saint Goban Isover PE-400 cpl insulation? Have an opportunity to buy a pretty...

bfaudio

Im planing on doing 4″ thick panels of 64kg/m3 density mineral wool with a 4″ air gap from the walls for the first reflection...

ElHombreSimio

I'm planning on stapling GOM fabric over some treatment frames made primarily from 1x2's. So I'm looking at cordless narrow crown...

Impurifier

I have a couple questions about the Multi-layer Absorption Calculator if someone wouldn't mind answering. All 3 of these plots...

ths61

Good afternoon, When looking to suspend pink fluffy within a trap, keeping it nice and....fluffy, I’ve read of orchard...

mrhudson

I’m doing the sketchup on a big fluffy trap for the back wall of my room. 13” deep + 12" gap 13’ wide 4'...

Impurifier

I am going to be transforming my garage into a mixing room. It is very much a rectangle, about 10 feet deep and 25 feet wide. I...

hduncan

Can anyone advise on a source of data for Flow (Air Flow) Resistivity for mineral wall? Can't find any on the big manufacturer's...

Dange

Hi All, Small question on positioning those QRDs: I'm about to DIY three N23 diffuserss for 350Hz design frequency to be...

iliaV

I'm looking a GIK panels / bass traps that use Ecose technology and wonder if anybody can chime in on the relative safety of...

bringmewater

Hi all, I paused the endless cycle of acoustical upgrades shortly after this thread:...

BJosephs

I have an 11 x 10 room for everything. So far I have 8 3.5 Inch Acoustic panels made of Rockwool. I have killed much if the pingy...

Dreezy

Hello from Sweden First post ������ We are building our own corner bass traps for our studio. They are the usual...

Rootp

Anyone have any experience with these newish panels from Output? They call them eco-acoustic panels....

celticrogues

I have a small 12' x 12' room that suffers from the strong axial modes at around 45Hz (∼24' wavelength). Due to slightly...

PhaseRoll

Hi everyone I have recently moved into converted garage-bedroom in Northumberland, UK. Pics show room. I have been...

keenly

Interested in building bass traps with some front diffusor panels like GIK uses:...

reydiverson

Has anyone here tried setting up a temporary ceiling using a party tent and absorbtion material? Could this work? I’m...

Trem

'Thanks to the leather its sound absorption over 600Hz is marginal while it is significantly more effective in the lower...

keenly

I almost exclusively record myself playing classical guitar. I own pretty good gear for recording. Certainly it’s not the weak...

regal1956

Found these in a going out of business auction. I found a lot of similar products online but nothing quite like these. Listed as...

Greedy

I am treating a 20x10x6' basement space which is obviously problematic for the low end. I have decided on going as anechoic as...

audiovisceral

I'm (still) planning my first proper room build and I am particularly worried about the nulls associated with the width dimension...

Scoox

I need to treat 71hz on the ceiling in my room, and was thinking of using GIK tuned traps, but I also want to reduce reflections....

keenly

I've been building my home studio space for ... a while .. and finally about finished. Three years ago, I was driving through...

trothwell

I'm struggling to find materials with very low GFR (about 3000 Pa*s/m2) to be used for very thick absorbers (600 mm). Since I...

Scoox

People might be aware that artificial mineral fibre products (Owen's corning, Rockwool, etc.) may be health hazards (e.g.,...

mashpete

I feel stupid, I have tried literally everything and nothing works. I’ve tried glue, tape, and a different brand of tape. How...

pooptastic

I have 8 acoustic treatment panels and 24 bass traps. The cheapest stuff I could find. How do I apply this stuff to the walls?...

pooptastic

Hey, I got acoustic foam and bass traps in the mail. How do I hang it up? I just hung up 3 with lanolin on the back, one fell of...

pooptastic

Hi, I have some leftover broadband traps from my old studio. While trying to improve my living room setup, I discovered that...

matskull

I swear I've used the search button, but I can't figure out why no one else has had my problem... I need to mount some bass...

JCBitB

How would it be to put one or a couple of these in each corner of my mixing room with the packaging on (as on the images) ? Will...

erike123

Hi, I've been trolling the net to find out the flow resistance of sheep's wool. I haven't found any data at all and have...

Jaymaster2000

I need help some with low frequency issues in my mixing room. At 54-60 hz there's quite a bit of resonance and a large dip around...

erike123

My room is 21' X 13' X 8'. I track (including a drum kit and vocals) and mix in it. The music generally falls between metal, rock...

danbronson

I am very concerned about particles / dust / fibers from assorted bass trapping materials getting into the air. I am generally...

666666

I've finally started to build my studio. It sure is 90% planning and 10% building as the quote says! The acoustic designer...

ostfisk