Quantcast
My home made diffuser - Gearspace.com
The No.1 Website for Pro Audio
My home made diffuser
Old 30th December 2007
  #1
My home made diffuser

Today i started a project to build some quadratic residue diffusers.
Overall not a difficult project--even though i used only hand tools to build this first test product. It took around 10 hours and cost less than $8.

Anyone have any reason to believe these wont work? I plan on building 7 more for the back wall of my room (which is around 16 feet away from my monitors).





Any suggestions?
Jeremy Cox
Old 30th December 2007
  #2
Lives for gear
 
avare's Avatar
 
🎧 15 years
Suggestions? If you could detail the work process (with pictures) for other people to know how to do it.

It is fantastic!

Andre
Old 30th December 2007 | Show parent
  #3
Gear Addict
 
kyle barton's Avatar
 
🎧 15 years
how are the bottoms of the "wells" suspended? or are those solid pieces? it looks like the same material as the grid. that stuff is inexpensive at lowes/homedepot. i never thought of making one out of that.

i'm interested in your comments after you get it into action. keep us posted.
Old 30th December 2007 | Show parent
  #4
Interestingly, when just talking in front of this one you can hear a change in acoustics. It seems to be an improvement but its hard to tell with only one panel.

I constructed it out of "hardboard" as Home Depot calls it and used two 2'x4'x1/8" sheets which cost 2.59 each. Below the wells there are pieces of 3/4' x 3/4" pine moulding which i cut to space the vertical slats (y axis), and keep the wells at the correct depth. This is $.38 per linear foot. In this model you can see how this works..



There are 3 pieces of moulding in each well to space the horizontal axis and 6 vertically to support the base of the wells. Although the entire thing is glued together (no nails at all) it is extremely rigid.

Any questions/ suggestions? I'll take pictures as I make this next one.

Jeremy Cox
Old 30th December 2007 | Show parent
  #5
Gear Guru
 
Glenn Kuras's Avatar
 
🎧 15 years
I don't know what "hardboard" is but if a solid piece of wood then it should work fine.

Way to go, but hope it does not take 10 hours on the next one.

Glenn
Old 30th December 2007 | Show parent
  #6
Hardboard seems to be in the same category as MDF. Its extremely rigid/often used in cheap ikea furniture.
The only reason it took so long is i don't have a table saw here in NYC! If someone around has one and wants help building some diffusers--i'd love to help .
Old 30th December 2007 | Show parent
  #7
Lives for gear
 
avare's Avatar
 
🎧 15 years
Thanks!
Old 30th December 2007 | Show parent
  #8
Lives for gear
 
🎧 15 years
Those are nice looking and should work just fine. The trick is to not repeat sequences too much and also more the distance from YOU to them rather than the monitors to them.

Bryan
Old 30th December 2007
  #9
Gear Guru
 
Ethan Winer's Avatar
 
🎧 15 years
Lightbulb

Quote:
Originally Posted by jeremycox ➑️
It took around 10 hours and cost less than $8.
Looking good Jeremy! But hopefully you realize that ten hours of your time is worth something too! If a pro mix engineer earns $50 per hour, that's $500 right there - before the $8 for the wood. heh

--Ethan
Old 31st December 2007 | Show parent
  #10
Quote:
Originally Posted by Ethan Winer ➑️
Looking good Jeremy! But hopefully you realize that ten hours of your time is worth something too! If a pro mix engineer earns $50 per hour, that's $500 right there - before the $8 for the wood. heh

--Ethan
I wouldnt do it again with hand tools. With a table saw it probably wouldnt take more than 2 hours. I'm going to do them 36" high for the actual models.
Old 31st December 2007 | Show parent
  #11
I tested the room with the panel 2' from the mic and it flattened 500 to 2k perfectly. Will post graphs tomorrow.
Old 31st December 2007 | Show parent
  #12
Lives for gear
 
No4PCs's Avatar
 
🎧 15 years
Quote:
Originally Posted by jeremycox ➑️
I tested the room with the panel 2' from the mic and it flattened 500 to 2k perfectly. Will post graphs tomorrow.


Friend, i did a kind of diffuser too, but with MDF wood, you know?

Then i did apply vernish on the MDF...did you try vernish? The vernished MDF looks like mogno!


Happy year 2008 everybody.
Old 31st December 2007 | Show parent
  #13
Gear Addict
 
pearldrum944's Avatar
 
1 Review written
🎧 15 years
Wow, that looks great! I may attempt this next month when I start putting treatment into my control room. How are you going to do the depths for the other panels? Make each separate panel identical to the others or vary the diffusion depths between the panels?
Old 1st January 2008 | Show parent
  #14
Gear Addict
 
kyle barton's Avatar
 
🎧 15 years
jeremy, what is the depth of the unit?
Old 2nd January 2008 | Show parent
  #15
Lives for gear
 
cjogo's Avatar
 
🎧 15 years
A collection from the recycling center

shipping material--inserts from TV , etc ---the sheets were purchased on line
https://gearspace.com/board/attachme...1&d=1199236616
_MG_7294.jpgt
Attached Thumbnails
My home made diffuser-_mg_7294.jpg  
Old 3rd January 2008 | Show parent
  #16
The depth is around 4 3/16"

All the calculations can be found here HiFi Speaker Design Β© mhSoft

I used 928Hz because its a good round number as far as converting from cm to in goes. Not super scientific though.
Old 5th January 2008 | Show parent
  #17
Gear Maniac
 
🎧 10 years
would there be any advantage if the bottom (depth) panels of hardwood were angled slightly????..would it diffuse more frequencies???
Old 6th January 2008 | Show parent
  #18
Gear Nut
 
🎧 10 years
Quote:
Originally Posted by imaverysoundman ➑️
would there be any advantage if the bottom (depth) panels of hardwood were angled slightly????..would it diffuse more frequencies???
Nope.

Jason
Old 9th January 2008 | Show parent
  #19
Gear Nut
 
NowWhat's Avatar
 
🎧 10 years
Quote:
Originally Posted by Glenn Kuras ➑️
I don't know what "hardboard" is but if a solid piece of wood then it should work fine.

Way to go, but hope it does not take 10 hours on the next one.

Glenn
ZING!
Old 25th January 2008 | Show parent
  #20
Lives for gear
 
🎧 15 years
Quote:
Originally Posted by Ethan Winer ➑️
hopefully you realize that ten hours of your time is worth something too! If a pro mix engineer earns $50 per hour, that's $500 right there
only if you''ve got work ...
Old 29th January 2008 | Show parent
  #21
Lives for gear
 
bino_5150's Avatar
 
🎧 10 years
I think I'll build one of these just for the hell of it. I have nail guns and a table saw, so this shouldn't be more than an hour or two tops...

good build though!
Old 29th January 2008 | Show parent
  #22
Im making more right now--at four feet tall. There will be 4 on my back wall. Its an easy build and you save a bunch of cash.

Jeremy
Old 30th January 2008 | Show parent
  #23
Here for the gear
 
spigot's Avatar
 
🎧 10 years
don't know about in the US but here diy stores will cut the wood for you...for a price, a small price to pay for not having 10hours of cutting wood!

great job and great links may even try some myself
Old 30th January 2008 | Show parent
  #24
Lives for gear
 
bino_5150's Avatar
 
🎧 10 years
Here in the US, diy stores like Home Depot and Lowes will cut it for you for free. But for a bunch of cuts like this, be polite and catch them when they aren't busy... and make sure you have all of your measurements right.
Old 30th January 2008 | Show parent
  #25
Here in NY Home depot charges $1 for each cut beyond two. You can rent a table saw for i think 40 dollars a day--maybe the best bet for someone w/o tools (at least up here).
Old 2nd April 2008 | Show parent
  #26
Lives for gear
 
johndykstra's Avatar
 
🎧 10 years
Jeremy,

It's been some time since your last post on this subject. I was wondering how the final product worked out for you, and maybe you have some pictures? Using the link you provided for the depth calculations should prove useful.
Old 1st June 2008 | Show parent
  #27
Here for the gear
 
🎧 10 years
Hi I can't resist showing you my new diffuser made in Black Mdf
19mm for the back and sides 9mm for the rest.
My friend Benjamin Minisini built it for me and I only have to polish it and to find somekind of roller system to move it because its weight is nearly 60 kilos.
I tried it with my bass clarinet and it's a pleasure to play it front of it...detailed and large sound...
Dimensions 124cmX64cmX22cm
Attached Thumbnails
My home made diffuser-reflect1.jpg  
Old 4th June 2008 | Show parent
  #28
Gear Addict
 
🎧 15 years
One way to keep weight down is to build the diffuser out of Gator Board. This is a lightweight and inexpensive material similar to foam core board, but made of a much stronger material because it has a wooden fiber pollimer between the laminate sheets. It also looks like foam core and only weighs slightly more.
Old 4th June 2008 | Show parent
  #29
Gear Addict
 
🎧 15 years
BTW, it might be good to fill the insides of your diffuser cavities with some sort insulation so they (the cavities) don't resonate. Otherwise it looks pretty good.
Old 4th June 2008 | Show parent
  #30
Here for the gear
 
🎧 10 years
Thanks for the advise but I'm not sure Gator board Exist here in France...
Perhaps it has another name?
If anybody has an idea...
πŸ“ Reply

Similar Threads

Thread / Thread Starter Replies / Views Last Post
replies: 31 views: 37366
Avatar for Ethan Winer
Ethan Winer 29th March 2009
replies: 1366 views: 1119601
Avatar for Grilled Cheese
Grilled Cheese 26th March 2021
replies: 75 views: 132991
Avatar for Burstwurst
Burstwurst 16th October 2020
replies: 75 views: 32496
Avatar for massimomucci
massimomucci 11th June 2020
Post Reply

Welcome to the Gearspace Pro Audio Community!

Registration benefits include:
  • The ability to reply to and create new discussions
  • Access to members-only giveaways & competitions
  • Interact with VIP industry experts in our guest Q&As
  • Access to members-only sub forum discussions
  • Access to members-only Chat Room
  • Get INSTANT ACCESS to the world's best private pro audio Classifieds for only USD $20/year
  • Promote your eBay auctions and Reverb.com listings for free
  • Remove this message!
You need an account to post a reply. Create a username and password below and an account will be created and your post entered.


 
 
Slide to join now Processing…

Forum Jump
Forum Jump