Hi! There seems to be alot of talk about bass trapping on the board right now so I thought it was a good idea to post some...

My dad and I are fed up with peaks and null in the mix and tracking room in our studio. We've decided to build 24 - 2'X4'...

Today i started a project to build some quadratic residue diffusers. Overall not a difficult project--even though i used only...

I'm considering some home made panels and bass traps using rock wool insulation. If I cover with tight weave burlap, will that...

I have a bunch of denim insulation and I'm considering making some free standing acoustic panels. The idea would be to get an...

Hello, I'm building arqen diffusors and one evening i wasn't paying much attention and i made mistake by gluing the top pieces...

hi guys, can please somebody tell me this is a very, very stupid idea: For bass management (absorbtion) I want to fill an...

Hi I have rockwool RW3 broadband absorbers (120x60x10cm) I built for a smallish live room. Im looking at adding some diffusion...

I'm once again buiding more bass traps. I'd love to just buy a slatted diffusor to put on the front instead of building my own. ...

It seems like adding an air gap to any panel of any depth or type of material improves its absorptive performance. When it...

Hey everyone, I'm planning to add two 4 feet panels and five 24" corner traps to a 10 feet x 10 feet room. The challenge is...

Hi, I'm looking to build some poly-cylindrical diffusers (scatterers). The aim is to do it cheaply and quickly as I might not...

Just wanted to post these measurements: A waterfall of a 120m3 room with just 4 corner superchunks added. Then a waterfall of...

I've been building my home studio space for ... a while .. and finally about finished. Three years ago, I was driving through...

Is there any reason not to use a table saw? I want to make several hundred precise cuts relatively quickly. I found a table saw...

in other words, what does this mean and how does it relate to acoustical/absortion properties (and compared to for example ever...

Hello, my monitors aren’t directly in the corners where the bass traps will be. See below. Is it okay to mount them there...

I have 2 soffit bass traps, 2 244 bass traps, and 2 242 bass traps all from GIK Acoustics. During mixing/in general, I have the...

My wife and I bought our first home, and for the first time ever I’ll have my own dedicated room for a home studio! The room I...

I have a couple questions about the Multi-layer Absorption Calculator if someone wouldn't mind answering. All 3 of these plots...

Hey people, I am going to install a bass trap and have 16.5 inches. How do I find out how much of it I should use as a gap? ...

Hello, everyone! howdy I finally decided it was about time to join the fun. :cowbell: So, here goes my first thread. As...

Hello Everyone, It has been a while since I posted here. Hope all is good.. I am re-wrapping my corner bass traps with a...

Hi all is the flow resistivity in slabs the same in every direction/axis ? speaking about "open" slabs, without a...

Hi guys, I posted a thread in the wrong forum and have not had many replies and really need some help. I have attached a...

Hi guys, I've been reading the posts around here for a while, and I figured you'd be interested in this (my apologies if it's a...

Hi all. I was planning to build a DIY bass trap using #4 density rockwool, and to make 9" deep rectangular penal to place...

Hi I've meassured my room i have nulling around 82 hz that has an -12dB loss from 70hz. I what do DIY and floor to backwall...

I have moved to a new house and are trying to find the optimal speaker placement. I am not looking for anyone to tell me where to...

I've built numerous porous absorbers, membrane absorbers, Helmholtz absorbers, and VPRs within the last years always wondering...

I am considering purchasing the Auralex hoverdeck to go under my drum set as a means to improve the sound of my drums in the...

Hi everyone, I've got my small studio desk set up in my finished attic. Because it's a finished attic, the dimensions are long...

What kind of diffusor would you recommend above the drumkit? Do they need to be special designed to work for the high frequnces...

Hi there, I've read quite a few posts around this question but can't seem to find a concise answer (I don't speak technical...

Hi all. I know this must been discussed for long long time with many other thread, and please forgive me for posting another one,...

Any Bag End E-Trap users here? How are they working out for you?

Hi, i was wondering if building corner bass trap completely filled with hemp fiber of 40 kg/m^3 would work or not. Also i was...

Over the years I have had great success fixing smallish room bass problems with limp mass absorbers. As there are so many...

I currently have many 3-inch thick acoustic panels in my room, mounted with a 3-inch air gap. I was just wondering if it would...

Sustainable Insulation | EcoBatt Insulation | Knauf Insulation Anyone have any experience using this Knauf product for deep...

After several threads here on the relative safety of rockwool, fiberglass, and organic fibers, I did a few days of digging...

Anyone used or own these traps or similar? The price is great but does the level of absorption suffer? Recommend or...

I plan on getting a cat (my old one died), and I'm worried they might scratch into fiberglass or roxul gobos and get toxic...

While Glenn of GIK recommends (in the GS forum) that RFZ be non-FRK, any advice on whether the other non-corner (wall and...

Hello everyone new to acoustic treatment, I need to record vocals soon in a 3.4m x 2.4m x 2.36m untreated room, on one wall a...

Our cat really loves climbing up my DIY acoustic panels. A couple of times they have come crashing down, because I'm in a rented...

I can get 4' x 2' x 2" Roxul in a 4' x 2' x 2" carboard box or 6 4' x 2' x 2" Acoustamic Eco Celullose panels...

I was wondering if anyone might have a suggestion on bass trap placement, when there is a door in one corner?

Hello, I tried to build a limp mass absorber but I didn't have much luck. This is what I did using tecsound t50 (very...

There seems to be much confusing about bass traps so I thought I would start a new thread that discusses the different types and...

I've got a bunch of corner panels to make with some with what is going to be odd angles. I got flat ceiling corners at each end...

Hi there, I will be moving house shortly and I wanted to build some acoustic panels when I move in to my new studio room. I...

Is this product okay to use for super chunk bass traps ? UltraBatt™ Insulation |...