Join Everett Porter, producer and engineer at Polyhymnia Studios, in the process of remastering Leonard Bernstein's 9...

Deleted 975c9df

I really do wish I had the restoration tools back when we started into business 30 years ago. All I had was basically equalisers...

Thomas W. Bethe

We are looking to do even higher quality transfers since a few of our clients have recently asked for them. This will be a major...

Thomas W. Bethe

I am starting a new thread for this, since it has little to do with the transfer procedure. I started transferring my old DATs...

JGebauer

I recently came into an Otari UFC-24 with SDIF-2 I/O. I need to come out of my PCM-1630 digitally to avoid its D/A card....

AudioRestorer

I have probably around 50 DAT recordings I would like to transfer to the computer for archiving. I have a DAT machine,...

JGebauer

So lately I have been trying the Noise Reduction plugins from CEDAR. I already own RX. I will be giving my thoughts on this...

Thomas W. Bethe

Had to do some transfers of a MD yesterday. We tried to do it digitally but this is a MD copy of the original and for some reason...

Thomas W. Bethe

Hi, I have this audio clip of some voices from a 78rpm record, but something went wrong when it was transferred and the pitch is...

heuvelke

Got in a project for a client. It was a transfer done from a tape recorded in the 1970s by a college radio station. We did not do...

Thomas W. Bethe

Here is the YT clip. https://youtu.be/6bIUXgVZz9A?si=L2Cm_Aj0oxSaAYWK The source tapes are slow speed reel to reel recorded...

timtape

I got a call yesterday about a VHS transfer. The potential client wanted a transfer of a "movie I just produced on VHS...

Thomas W. Bethe

I am working on a musical selection for a client. The music is well recorded BUT someone, at some time in the past, did some...

Thomas W. Bethe

Hey guys, I am working on restoring a lost-to-time recording, just for personal, hobby purposes. This is a song that was...

AVaughn

Got in 36 cassettes for transfer and restoration. These are from a long time client who we have done similar work for in the...

Thomas W. Bethe

A friend who I was in my first band with (way back in the 80s) kept some of the original studio recordings we did that are on 1/4...

dgc4rter

How can I get my music off of some old dat tapes and tascam 4 track mixes without getting the machines I just to get them on a cd...

mr.dumoss101

Anyone have this equipment available? Please PM me. Thanks :thumbsup:

Thomas W. Bethe

It was a reel to reel tape tape supposedly done in the late 1960s or early 1970s. It was quarter track stereo. There was music...

Thomas W. Bethe

hello! hope this is the right place for this and apologies if not. i am a studio and live mixing engineer and producer, and a...

ImpressiveDeer

One side of a two record set was 29 minutes and 9 seconds. It was of a G&S performance in the 1960s at a local college. The...

Thomas W. Bethe

Hi, I'm working with a producer who needs an 8 track tape transferred to Wav. files for importing into pro tools etc. If you also...

engmix

I have a good friend who just passed away. He was an avid collector of musical broadcast tapes. He had a library of over 2000...

Thomas W. Bethe

Just since it came up in another mastering thread, here are a couple of screenshots of old reel recordings from my collection....

timtape

I just got in 60+ classical recordings that the client wants to make into an anthology. They range from the late 60's to the...

Thomas W. Bethe

First, I should say that beyond having some success with DeClip long ago I'm otherwise not at all experienced using Izotope Rx. I...

d1966

I just got three tape decks A Tascam 32, a Tascam 34 and an Otari MX-5050B four channel machine. My friend is getting out the...

Thomas W. Bethe

A slightly unusual case for me. I received a 3" reel, 1/4" tape to transfer. It was one of those "living...

timtape

Hi all Is it possible to add punchiness to a ripped track sourced from vinyl? i can undertand the process for adding punch...

futurebrain

A local resident, who I know, called me to ask if I could transfer 6 audio cassettes to CDs. I told her "yes" so...

Thomas W. Bethe

It played back perfectly with no problems. I pre spooled it just to make sure there were no broken splices or adhesion problems....

Thomas W. Bethe

This was for a local client. The records were 33.3 RPM, 45 RPM and 78 RPM. They were all done on vinyl. The transfers came off...

Thomas W. Bethe

Hi, I purchased a tape that seems to be impossible to find a player for. A very early digital tape format, "3M 265 Digital...

Tootai

See here...

Thomas W. Bethe

The distortion is caused by a) overloaded inputs on the original recordings b) by using the wrong bias settings on the cassette...

Thomas W. Bethe

Something a little different. Film audio is still audio and it seems sometimes neglected or even looked down upon as of...

timtape

I just transferred 22 C-90 cassettes. Now the client wants me to edit out the "pregnant pauses" where the speaker...

Thomas W. Bethe

When listening to a track made from roughly 1960's to 1980's on Spotify or any similar streaming service.... what am I...

contramark

From a recent client via Email Hi Tom: I want to thank you for the masterful job you did of repairing my old audio cassette...

Thomas W. Bethe

Yo. I have a Tascam 112mk3 which I used maybe for 4 hours and the push buttons (and therefore maybe the logic controls?) have...

Deleted 975c9df

The cassette deck playback does not even register on the deck's VU meters. It was recorded in a living room with a group of women...

Thomas W. Bethe

I got a phone call today from a prospective client. He called at 8am this morning and hung on the phone for over 20 minutes. He...

Thomas W. Bethe

I just got a strange phone call from a potential client. He wanted me to do some transfer work. So I asked him what was the...

Thomas W. Bethe

I have this out-of-state client for a while. We do sporadic work for them. They are now questioning how much I charge for the...

Thomas W. Bethe

Four of them are "Radio Shack" two of them are name brands. All of the Radio Shack cassettes were "jammed"...

Thomas W. Bethe

It was recorded in the 1960s in Vietnam by a US service man. 1/4 track recorded in both directions at 3 3/4 ips on a roll of .5...

Thomas W. Bethe

So I get in a cassette that was done sometime in the 70's. It was done on a battery operated cassette deck on a really cheap...

Thomas W. Bethe

I got in a tape to transfer. It was 15 ips but did not play well on my four channel 1/4" machine or on my 2 track...

Thomas W. Bethe

I got in a transfer from Texas. It cost the sender over $15.00 to send the 10.5" reel to me for transfer. It was a reel of...

Thomas W. Bethe

Doing some transfers for a client of some DAT tapes that were done in the early 1990s. Of the four DAT tapes I have been given to...

Thomas W. Bethe

The problem is he does not know what format they are in or how long each tape is but wants me to "ballpark" a cost per...

Thomas W. Bethe