HELLO!
I want to solder 16 peaces of -10db pads or possibly -20db.
Maybe -10 db is enough? Pads should be unbalanced.
-10 db pads should go between INSERTS-out (or DIRECT OUT) on the mixer to the line inputs on my "Tracker MT16" (16 channel recorder with line inputs). The recorder has no GAIN control and easily get clipped.
I have seen on the diagram on this website
http://www.uneeda-audio.com/pads/lpad.jpg (the one on the left) that I need 2 different RESISTORS.
R1 and R2. But I need help with which ones resistor to buy.
And is 1% metal film better than the 5% are carbon film?
It also has to do with the impedance, right? The impedance of a line input is usually 10 k ohms, right?
THANK YOU!