Quantcast
Rob Schnapf - Page 20 - Gearspace.com
The No.1 Website for Pro Audio
Rob Schnapf
Old 3rd October 2009 | Show parent
  #571
Gear Guru
 
RoundBadge's Avatar
 
🎧 15 years
Oops. sorry for the delay.
the 102 card is good.that is THE mix card for this box.
the scotch card is kinda the older lower fi tape thing.distorts faster.its cool.I'm sure i'll find uses for it
did a mix and I ran a bunch of kinda thin bright sounding PT tracks[the overheads were especially awful,think 451's or 184's] out & printed back through the 102 and 351 cards tweaking diff tapes & bias/eq slightly to darken some things a bit.hitting different levels for a bit of saturation here and there..then ran the whole shebang through the 102/456 after the Ears.

damned if the thing wasn't way easier to mix.used less eq.helped a lot


..
Old 3rd October 2009 | Show parent
  #572
Lives for gear
 
Fleaman's Avatar
 
🎧 15 years
Cool. Looks like the 102 card is in my future.

Scotch card> Looks to be a more effecty tape card than the others? Like if one was to tape distort/crush drums or something (for a measure or so, like trip hop dj's do a lot), the Scotch might work better than the other tape cards?
Old 3rd October 2009 | Show parent
  #573
Gear Guru
 
RoundBadge's Avatar
 
🎧 15 years
Quote:
Originally Posted by Fleaman ➑️
Cool. Looks like the 102 card is in my future.
thumbsup

Quote:
Originally Posted by Fleaman ➑️
Scotch card> Looks to be a more effecty tape card than the others? Like if one was to tape distort/crush drums or something (for a measure or so, like trip hop dj's do a lot), the Scotch might work better than the other tape cards?
thumbsup
Old 3rd October 2009 | Show parent
  #574
Lives for gear
 
Fleaman's Avatar
 
🎧 15 years
Quote:
Originally Posted by RoundBadge ➑️
damned if the thing wasn't way easier to mix.used less eq.helped a lot

..
So is this your box now? Or still borrowing?
Old 3rd October 2009 | Show parent
  #575
Lives for gear
 
rob S's Avatar
 
🎧 10 years
damn it, i gotta hear these.
Old 3rd October 2009 | Show parent
  #576
Lives for gear
 
Fleaman's Avatar
 
🎧 15 years
Quote:
Originally Posted by rob S ➑️
damn it, i gotta hear these.
You can drive mine when I get them.
Old 4th October 2009 | Show parent
  #577
Gear Guru
 
RoundBadge's Avatar
 
🎧 15 years
Quote:
Originally Posted by Fleaman ➑️
So is this your box now? Or still borrowing?
Finally bought it ..fully loaded
Old 4th October 2009 | Show parent
  #578
Lives for gear
 
rob S's Avatar
 
🎧 10 years
you can only buy those direct, right?
Old 4th October 2009 | Show parent
  #579
Gear Guru
 
RoundBadge's Avatar
 
🎧 15 years
Thats the only way that I know of[in the US]
Old 5th October 2009 | Show parent
  #580
Lives for gear
 
jeremyglover's Avatar
 
🎧 10 years
hey rob,
love your work.
what's in the neve stereo buss on your MCI?
by that i mean what components were used.
thanks, jeremy
Old 5th October 2009 | Show parent
  #581
Lives for gear
 
rob S's Avatar
 
🎧 10 years
Quote:
Originally Posted by passivepeter ➑️
hey rob,
love your work.
what's in the neve stereo buss on your MCI?
by that i mean what components were used.
thanks, jeremy
hi jeremy

this is some of whats cooking in the MCI

183's in ch 9,10 for mic pre and buss O/P
283's for rear summing (passive w/ lo11468 transformers) and rear O/P
3314s for rear insert send and return (lo11467 line transformers for return)
3314 (O/p only loaded) for ch 11,12 Buss O/P

its alot different then a regular 428B

rob
Old 6th October 2009 | Show parent
  #582
Lives for gear
 
rob S's Avatar
 
🎧 10 years
and the front busses are 990's with jensen transformers.

so obviously as previously stated the quad buss has been split into two pairs.
these pairs can be run serially or parallel with each other.
Old 10th October 2009 | Show parent
  #583
Lives for gear
 
rob S's Avatar
 
🎧 10 years
and it stilll isnt finished.......
Old 10th October 2009 | Show parent
  #584
Gear Guru
 
RoundBadge's Avatar
 
🎧 15 years
Quote:
Originally Posted by rob S ➑️
and it stilll isnt finished.......
But your using it finally?
Old 10th October 2009 | Show parent
  #585
Lives for gear
 
jeremyglover's Avatar
 
🎧 10 years
that must be killing you.
all good things take time i guess...
Old 10th October 2009 | Show parent
  #586
Lives for gear
 
Fleaman's Avatar
 
🎧 15 years
Quote:
Originally Posted by rob S ➑️
and it stilll isnt finished.......
More than 1 channel though?
Old 11th October 2009 | Show parent
  #587
Lives for gear
 
rob S's Avatar
 
🎧 10 years
i'm not using it.
i was using the room with the 16 channel electrodyne console and my other racks.
now the mci is in there getting finished and the electrodyne is getting integrated with it so the whole room is down.
its been down 2 months and counting now.
inching closer to completion,
inching closer to oblivion......
Old 11th October 2009 | Show parent
  #588
Gear Nut
 
Brad_Wood's Avatar
 
🎧 15 years
Quote:
Originally Posted by rob S ➑️
so the whole room is down.
its been down 2 months and counting now.
inching closer to completion,
inching closer to oblivion......
2 months?!? Ugh... you need beer at least as much as I do.

Best- Brad
Old 11th October 2009 | Show parent
  #589
Lives for gear
 
rob S's Avatar
 
🎧 10 years
vodka
Old 11th October 2009 | Show parent
  #590
Lives for gear
 
Fleaman's Avatar
 
🎧 15 years
Vodka + Beer
Old 12th October 2009 | Show parent
  #591
Lives for gear
 
rob S's Avatar
 
🎧 10 years
the russian car bomb
Old 23rd October 2009 | Show parent
  #592
Lives for gear
 
rob S's Avatar
 
🎧 10 years
genex is back.
they are now called desono.
great converters.
Old 19th November 2009 | Show parent
  #593
Lives for gear
 
rob S's Avatar
 
🎧 10 years
the MCI has modules loaded in it.
lights are on and tones are running thru it.
still some modules to fix and some gain scaling to do.
but man its getting really close.
should be done by the end of the decade......
Old 19th November 2009 | Show parent
  #594
Gear Guru
 
RoundBadge's Avatar
 
🎧 15 years
Quote:
Originally Posted by rob S ➑️
should be done by the end of the decade......
Hallelujah brother

Old 19th November 2009 | Show parent
  #595
Lives for gear
 
Fleaman's Avatar
 
🎧 15 years
Wow
Old 20th January 2010 | Show parent
  #596
Lives for gear
 
rob S's Avatar
 
🎧 10 years
call me crazy but my hate for the D sub makes me yearn for the tuchel.
Old 20th January 2010 | Show parent
  #597
Gear Nut
 
Brad_Wood's Avatar
 
🎧 15 years
Quote:
Originally Posted by rob S ➑️
call me crazy but my hate for the D sub makes me yearn for the tuchel.
Get with it, gramps. Are you wiring up those dsubs yourself?

Best- Brad
Old 21st January 2010 | Show parent
  #598
Lives for gear
 
rob S's Avatar
 
🎧 10 years
i aint wiring ****.
i just think they are inferior technology.
as in a ****ty connector.
everything i dont want in the thing that connects gear t other gear.
they are not made for lots of connecting and disconnecting.
they get finnicky at funny angels and tight spaces.
it makes **** not work.
i hate them.
and they are the standard.
Old 21st January 2010 | Show parent
  #599
Lives for gear
 
Fleaman's Avatar
 
🎧 15 years
And they are not fun to build yourself.
Old 27th January 2010 | Show parent
  #600
Gear Maniac
 
blue_thunder's Avatar
 
🎧 10 years
Man, this is a great thread! It took me a while to read through all 20 pages of it, but there is some great info on alot of my favorite albums and some high end gear that I'd love to own. Anyway, how's the mci coming along? Can we expect to hear it on any upcoming albums? I'd love to see some pics of it? Also, does it have anykind of automation, or do you do all of that in PT?

Thanks,
Joe

Last edited by blue_thunder; 28th January 2010 at 02:41 PM.. Reason: spite
πŸ“ Reply

Similar Threads

Thread / Thread Starter Replies / Views Last Post
replies: 1181 views: 269650
Avatar for AynRandFan
AynRandFan 1 week ago
replies: 295 views: 75931
Avatar for anguswoodhead
anguswoodhead 26th March 2013
replies: 127 views: 12952
Avatar for kiopo
kiopo 2nd October 2012
replies: 1296 views: 185557
Avatar for heraldo_jones
heraldo_jones 1st February 2016
Post Reply

Welcome to the Gearspace Pro Audio Community!

Registration benefits include:
  • The ability to reply to and create new discussions
  • Access to members-only giveaways & competitions
  • Interact with VIP industry experts in our guest Q&As
  • Access to members-only sub forum discussions
  • Access to members-only Chat Room
  • Get INSTANT ACCESS to the world's best private pro audio Classifieds for only USD $20/year
  • Promote your eBay auctions and Reverb.com listings for free
  • Remove this message!
You need an account to post a reply. Create a username and password below and an account will be created and your post entered.


 
 
Slide to join now Processing…

Forum Jump
Forum Jump