Quote:
Originally Posted by
phaqu
β‘οΈ
No signal through line in either? Also,do you have Mic/line or tape switch engaged in the trim section at the very top? That toggles the channel between the tape inputs and the mic line inputs. Up for mic and down for tape.
If you send the signal to a bus, is there any meter activity on the buss section, with the bus faders up?
Now if you do plug into the line in, and have the line in button down, by the XLR input, and the mic line/tape switch up by the trim knob,and the faders up, plug a headphone into the direct out, you should be able hear something on the phones.
And try turning the trim knob to see if it scratches or boosts the signal.
Now from my understanding, the 8 buss is wired in groups of 8 channels to a circuit board, so the chances of 2 boards going bad at the same time are slim, but you never know.
The the bus meters show activity, but very low, because the signal comes through all tinny and weak. It's definately not an output problem because when I put Mix B pots to unity and assign Mix B to LR mix, I get perfect sound. It's got to be something to do with the pre-amps that the line-in and returns run through right?
Also, I should note that when I connect my monitors to 2 of the direct outs, I get the pathetic quality through.
It's so weird, I really just wish someone could come fiddle with it, diagnose it and tell me how to fix it.