Quote:
Originally Posted by
dfghdhr
➡️
As you see from the image below, “a plugged instrument deactivates Mic 2”, which means the instrument should necessarily go through Channel 2. Which brings me back to my question: Wouldn't that be problematic for perfect stereo tracking? Your answer was “No, because the instrument input is independent of the microphone input”. But again the image below proves that wrong. So we're back to my original question.
From the homepage: " If an instrument is plugged into the instrument input, mic input 2 is deactivated." This normally is relay-based and goes both ways. Meaning, if no instrument is plugged in to the Hi-Z Input, it is physically switched off, so the Mic-Input won't even "see" it.