Quote:
Originally Posted by
t_d
➡️
- the buttons (the clear ones) feel a bit flimsy to me... especially when bypassing the unit in and out.. the button wiggles a bit and i fear that it would lose solder point or connection. i'd likely bypass via my Liaison, but, still.. it worries me.
Greetings,
Thanks for taking the unit for a spin and for taking the time to post your thoughts. The buttons that you refer to are held in by 12 solder connections and will never come loose but the feel of them is just that - the feel. It would be nice if I could have something custom in the way of buttons made but I'm stuck with off the shelf solutions. I have yet to have a button fail but should a button ever fail, they sit on their own "button" circuit board and it can be replaced with nothing more than a phillips screwdriver and two minutes of your time.
The unit was designed in a modular fashion so that a failure wouldn't take out the entire unit.
Finally, the Air circuit is really a tough one in that the mastering guys seem to want a bit less and guys like me always want to push it a bit more. Eric and myself fight over it all the time. Luckily, there is a simple trimmer that sets the air and I'll gladly walk you through it if you wish.
Again, thanks for the honest feedback and please do not hesitate to hit me up if you have any questions.
