The No.1 Website for Pro Audio
IGS AUDIO Tubecore 3U
5 5 out of 5, based on 2 Reviews

A brilliant must-hear from Poland.


18th August 2021

IGS AUDIO Tubecore 3U by DJamesGoody

  • Sound Quality 5 out of 5
  • Ease of use 5 out of 5
  • Features 5 out of 5
  • Bang for buck 5 out of 5
  • Overall: 5
IGS AUDIO Tubecore 3U

When I heard the Tubecore, I wasn't looking for another Vari-Mu. In fact, I was looking for a decidedly different beast : a diode bridge compressor. After a brief email exchange with Nathan at Atlas Pro Audio, he informed me that the IGS V8 - a diode bridge compressor, a la Neve 33609/2254 - would be several weeks to ship. With this info, I had the choice of simply waiting it out, or going a different route. Perhaps, the Buzz, or another comp of that ilk.

Instead, I was persuaded to give the Tubecore a shot. Figuring that I could always return it and exchange for a V8, I decided to go for it and give it a whirl. I couldn't have made a better decision.

For starters, Nathan is a world class retailer. He made sure the box was working beautifully before shipping it, and he got it to me with no time to waste. Packaged exactly how you'd want a several thousand dollar machine to be shipped, I opened it excitedly and set it upon my rack, plugging in the hefty external power supply, and connecting a couple of loose tie lines.

I let it warm up for about 30 minutes before I ran signal through it, but when I finally did...... oh my. It immediately sounded rich, without doing anything. Leaving thresholds way above any activity, and moderate input and output gains, I strapped it onto the buss of a project I had just finished mixing a week prior, and what I heard was the subtle character shift that a high class valve box imparts - a slight deepening of harmonic richness, and the most complimentary, almost imperceptible rounding of transients.

I started to dig in. Still in 'stereo' mode, I started hitting the transients a bit more, careful not to go too far, but giving that indescribable 'pillowy' quality that only a Vari Mu does this well. And the harder you push it, the more pillowy it becomes. It was doing all the things I want a Mu to do... that cliched glue that we all talk about, and the utter lack of 'pumping' whilst hitting it hard, and the rich harmonic artifacts of valve compression slightly widening the stage.
It was making all the right sounds...

I then switched over the M/S mode, which is the main reason I decided to try this machine in the first place. I've been mixing and mastering in M/S more and more over the last few years, and this box manages to do that for significantly less money than some others that do it very well. I wasn't disappointed. Immediately I could dial in the depth from the sides that I wanted, while smacking the middle for aggression. Or vice versa. It was all happening so effortlessly, and most importantly, it did so in the most elegant and classy way.

I happened to have a Highland Dynamics BG1 on loan from a friend at the same time, and I did some comparisons whilst both were in the room. it became clear to me that while the BG1 is an outstanding box, the IGS did the master buss duty better - at least for my taste. There was less pump, more clarity, and the added benefit of M/S processing made it a no brainer. Of course, the BG1 sounded brilliant, and had no shortage of interesting capabilities. The BG1 made great work of several individual sources like vocals, bass, even drums. But the IGS was just more what I was looking for. A highly capable and creative machine for buss processing that sounded far more expensive than it is.

The reality is that compression of this sort is very expensive. Even the IGS box is not exactly bargain basement, but comparing it to its direct competitors, It is hard not to say it's affordable. It also outdoes many of the modern Vari-Mu types I've heard, including the Manley and the Thermionic. And while it provided a different workflow and use than the Highland BG1, it's clear that the IGS plays in that league. It is high end, for damn sure. It sounds it, looks it, and feels it.

  • 7
16th December 2021

IGS AUDIO Tubecore 3U by carolcappetta

  • Sound Quality 5 out of 5
  • Ease of use 5 out of 5
  • Features 5 out of 5
  • Bang for buck 5 out of 5
  • Overall: 5
IGS AUDIO Tubecore 3U

Through the years I have had my share of hardware compressors, the usual suspects, 1176's, la2a's, and the sta level, and I sold all of them except for my vintage Neve 32254/E pair.
The igs tubecore 3U mastering edition is on the very same level, I couldn't hear a difference between the Neve or the IGS on the mix bus, except that the Neve had a higher noise floor as we all know but the IGS was very quiet.
Every track that I run through the tubecore sounds better, warmer and fatter and most of all you do not loose the low end on a kick drum or bass guitar like with a lot of compressors.
Their are many options for the attack and release times which is great.
I am using the 6N1P-EW tubes which is the standard set of tubes but you have other choices of tubes to Taylor the sound to your liking.
I am considering selling my vintage Neve because the tubecore sounds that good !!
Ive read many posts here saying that people chose the tubecore over the Manely vari-mu and the BG 2 and that to me is a big deal especially when you consider how expensive the other compressors are.
At this price point, this compressor can't be beat.
Do yourself a big favor and give IGS a chance to make your music better and you can thank me later.
The owner at IGS Mr Igor answered every question I had and was always there to help me.
Thank you Igor at IGS for making an amazing classic compressor that I will never sell