Quantcast
Simple, one day rolling rack/mixer stand build. - Gearspace.com
The No.1 Website for Pro Audio
Simple, one day rolling rack/mixer stand build.
Old 15th February 2020
  #1
Gear Addict
 
🎧 5 years
Simple, one day rolling rack/mixer stand build.

Built a super basic rolling mixer stand/10U slanted rack today. Figured I would post it up as an example.

It uses a pair of Gator 12U rack rails, four 4ft perforated angle irons, a few short pieces of perforated flat stock, and four 2" casters. Also a lot of use of the angle grinder with a cutting disk. Went together in 3 or 4 hours.

Rails with some patch bays to set the spacing.



All the parts needed.



Getting the spacing right.



I made the base square. Seems to have worked well with the tilt back and length of my mixer.



Brought it into my space that I am setting up to check the lay back of the rack. Needed some adjustments to get to where I was happy.



And the finished rack. The equipment forms a structural part of it.



First piece in. Need to decide what all is going where now that I finally have a space I can set up as a control/mixing room. Also need to find the rack ears for my mixer that went... somewhere, during my move.

Attached Thumbnails
Simple, one day rolling rack/mixer stand build.-photo_2020-02-15_14-23-30.jpg   Simple, one day rolling rack/mixer stand build.-photo_2020-02-15_14-23-31-2-.jpg   Simple, one day rolling rack/mixer stand build.-photo_2020-02-15_14-23-31.jpg   Simple, one day rolling rack/mixer stand build.-photo_2020-02-15_14-23-32-2-.jpg   Simple, one day rolling rack/mixer stand build.-photo_2020-02-15_14-23-32.jpg  

Simple, one day rolling rack/mixer stand build.-photo_2020-02-15_16-38-32.jpg   Simple, one day rolling rack/mixer stand build.-photo_2020-02-15_17-30-28.jpg  
Old 18th February 2020
  #2
Gear Addict
 
🎧 5 years
And racked up a bunch of stuff to try it out. I could not find the rack ears, so just used some brackets from lowes, but it looks good.

I need to add a base plate of some sort so the cables don't fall through.



Attached Thumbnails
Simple, one day rolling rack/mixer stand build.-photo_2020-02-17_20-18-35.jpg   Simple, one day rolling rack/mixer stand build.-photo_2020-02-17_20-23-14.jpg  
Old 18th February 2020
  #3
Gear Guru
 
Bignatius's Avatar
Nice job.
Old 22nd June 2020
  #4
Here for the gear
 
Thank you for this, I’m definitely going to use this as a base for my build.
📝 Reply
Post Reply

Welcome to the Gearspace Pro Audio Community!

Registration benefits include:
  • The ability to reply to and create new discussions
  • Access to members-only giveaways & competitions
  • Interact with VIP industry experts in our guest Q&As
  • Access to members-only sub forum discussions
  • Access to members-only Chat Room
  • Get INSTANT ACCESS to the world's best private pro audio Classifieds for only USD $20/year
  • Promote your eBay auctions and Reverb.com listings for free
  • Remove this message!
You need an account to post a reply. Create a username and password below and an account will be created and your post entered.


 
 
Slide to join now Processing…

Forum Jump
Forum Jump