Quantcast
Toybox Release Nano Pack 2 - Gearspace.com
The No.1 Website for Pro Audio
Toybox Release Nano Pack 2
Old 1 week ago
  #1
Toybox Release Nano Pack 2



After the success of the original Nano Pack, we have just released Nano Pack 2! The updated pack includes over 150 brand new blocks as well as many improvements and fixes.

The pack’s 700 mini-sized synthesis blocks for Reaktor Player can be combined in limitless combinations using virtual patch cables. The blocks combine sequencing, sampling and digital synthesis with state of the art analogue modelling.

Nano Pack 2 can be purchased for a limited time for $45 (30% off), the update is free for existing users (just log in to your account to download the pack again).

More information on the Nano Pack can be found here: www.toyboxaudio.com

New blocks added to V2 include:
  • Container and Container (Advanced) - Use these to build your own Nano Blocks
  • 4 Op FM Synth - A 4 operator FM style synth
  • Boom Synth - A synth for 808 style kick drums
  • Snare 1 - A simple snare synth
  • Snare 2 - A snare synth with an advanced algorithm
  • Physical Modelling Synth - A synth based on physical modelling principles
  • Wavetable Synth - A synth block based on a wavetable oscillator
  • PD Fold Synth - A polyphonic synth block based on a phase distortion oscillator, a wavefolder and a low pass gate
  • Wavetable Fold Synth - A polyphonic synth block based on a wavetable oscillator, a wavefolder and a low pass gate
  • Unison Wavetable - A wavetable oscillator with 7 unison voices
  • FM 2 Stack - 2 FM operators arranged in a simple stack, with one operator modulating the other. Can be combined for more complex FM algorithms
  • Unison Wavetable - A wavetable oscillator with 7 unison voices
  • Sequencer Segment - A single segment of a sequencer. Daisy-chain several segments by connecting the NEXT port to the next segments RESET port
  • Chord Bank - A block that stores a bank of 120 chords (with up to 6 notes in each chord)
  • Convolution Reverb, Zero Latency Convolution Reverb & Spring Reverb - 3 blocks based on Colin Browns brilliant "Viva la Convolution" ensemble
  • Exciter - A block that adds harmonics into the signal by wave-shaping a band-passed copy of the signal and then blending this back into the source
  • Micro Pitch - Blends up to 17 individually pitch-shifted parallel voices
  • Resonator - A matrix reverb, good for rich, large and resonant reverbs
  • Looper - A stereo phrase looper
  • Bit Shifter - An 8 bit distortion effect with controls to enable, disable and shift each bit
  • Early Reflections - A convolution reverb block loaded with early reflection impulses
  • Model Cycles Sound, Model Samples Sound, LFO, Track, More & Effect - A suite of blocks that send CC messages to control parameters of the Elektron Model:Cycles and Model:Samples hardware
  • Launchpad Velocity To Value - A block for Novation Launchpad Pro owners, will convert note velocity values stored in the Launchpad sequencer into control values
  • MIDI Knob Recorder - A MIDI assignable knob recorder with record buttons for each knob, records the movement of the knobs as phrases
  • 2D Chaos - A block based on a set of 2D attractors
  • Sample Position (Raw) - A very simple sample player using a simple playback algorithm with no interpolation between samples
  • Highest - Passes the signal with the highest numeric value. Useful for combining gate and envelope signals
  • MIDI Thru - Sends MIDI events received at Reaktor’s MIDI input directly through to Reaktor’s MIDI output
  • MIDI Thru (Filter Midi Notes) - Selected notes will be filtered and not passed to the output. Useful for isolating particular notes to be used to trigger actions etc.
  • Number Sequence - Incoming gate signals trigger a sequence of values derived from well known numeric sequences: Square Root 2, Pi, Pi (Hexadecimal), Phi, e, Square Root 3
  • Knob Bank - 4 banks of 5 macro knobs. The knobs can be MIDI learnt from a hardware MIDI controller
  • Beat Repeat - A stereo beat repeat style effect. The difference between this block and the Looper block is that this block loops the audio that was recorded AFTER the loop button was pressed whereas the Looper block loops the audio that was recorded BEFORE the loop button was pressed
  • Tape Stop - A stereo tape stop effect
  • Single Delay (Stereo) - A single stereo delay with feedback and high and low pass filters in the feedback path
  • Shift Register - A shift register with up to 32 registers
  • Bell EQ (2 pole) - A 2-pole bell shaped equalizer style filter
  • Velocity To Snapshot - Select snapshots using velocity
  • Width - Adjusts the stereo width of the stereo input
  • Crossfader (Stereo) - A stereo crossfader
  • Crossfader (Centre Even) - Crossfades between inputs 1 and 2. When the FADE knob is in the centre, the inputs are mixed evenly without any reduction in gain
  • Level (Linear) - Reduces the level of the incoming signals using a linear scale
  • Exciter Envelope - A short bidirectional envelope. This envelope can be used to create short sounds suitable for exciting resonators or pinging filters
  • Delay 5 & Delay 5 (Raw) - 5 completely independent low-CPU delays in a single block
  • Offset Delay - A simple stereo delay, useful to offset timing or correct latency issues
  • Gate Width - When this block receives an incoming gate signal it outputs a gate signal held for the duration set by the TIME control
  • Ramp To Clock - Generates clock signals from the incoming ramps signal
  • Pass If >0 - If the input is greater than zero it is passed, otherwise the last non zero value is held
  • Synced Delay 6 - 6 completely independent tempo-synced delays
  • MIDI Monitor - Shows the value of MIDI events received at the block’s MIDI input
  • 96 Clock - Outputs clock signals at a rate of 96 clocks per bar
  • MIDI Clock Out - Sends out MIDI clock messages
  • MIDI Clock In - Receives MIDI clock signals from MIDI and the host (enable Sync To External Clock)
  • MIDI Program Change - Sends out MIDI program change messages
  • MIDI Program Change (Triggered) - Sends out MIDI program change messages when a gate signal is received by the Trigger ports
  • MIDI Clock Control - Sends MIDI clock messages controlled by a built in ramp generator. The block can also send out MIDI program change messages
  • MIDI Out 3 - Sends out MIDI note messages on 3 different channels
  • Divide - Divides the first input by the second input
  • 1 Div X - Divides 1 by the input value
  • Wrap 0-1 (1=0) - Same as Wrap 0-1 but if the input is exactly 1 then the output will be zero
  • Pitchbend Out - Sends out 14bit MIDI pitch bend data over 6 channels
  • Multiply 2 - Doubles the level of the input
  • Default Value & Default - For setting default (normalised) values or connections for ports
  • Blank Panel - A blank panel with no connections. Useful for organising and tidying racks

A full list of changes can be found here:

www.toyboxaudio.com/pages/please-notes
Old 1 week ago
  #2
Lives for gear
 
🎧 5 years
Great news. Thanks for the free update.
Old 6 days ago
  #3
Here for the gear
 
Is everything from nanopack 1 included?
Old 6 days ago | Show parent
  #4
Quote:
Originally Posted by tingtingring ➡️
Is everything from nanopack 1 included?
Yes, everything (with improvements) plus the additional new blocks.
Old 6 days ago
  #5
Gear Nut
 
long_time_lurker's Avatar
 
🎧 5 years
Great Update, great value, great pack. Lots of fun.
Old 5 days ago | Show parent
  #6
Quote:
Originally Posted by long_time_lurker ➡️
Great Update, great value, great pack. Lots of fun.
Brilliant, thanks!
Old 2 days ago
  #7
Here are some Example racks built with some of the Nano Pack V2 blocks:

https://www.dropbox.com/sh/b2pyi3rze...aAjdr-E7a?dl=0

A brief description of each rack:
  • Elektron Model Samples Control --> A rack for use with the Elektron Model:Samples (swap out the M:S blocks with M:C blocks to use this rack with the Model:Cycles).
  • Geiger --> A rack that produces glitchy noise! The rack uses the '2D Chaos' block to randomly modulate the X & Y position of the 'XY Wavetable' block, then sends this through a Bit Shifter and Comb Filter for more randomness.
  • Mindrothe --> An 'OTA Filter' block that is 'pinged' using the 'Exciter Envelope' block and then 'granulated' and fed back through a reverb to create a ringing feedback pad sound, which is then given a 'tape stop' effect with the 'Tape Stop' block (run the transport to hear the 'tape stop').
  • Mindy --> A simple example of using the 'Seq Segment' and 'Unison Wavetable' blocks. 4 'Seq Segment' blocks are daisy-chained together using their 'NEXT' & 'RESET' ports. This chain of blocks is reset every half bar from the GATE port of the 'Ramps' block. The PITCH & GATE ports of all 4 sequencer blocks are summed together before controlling the 'Unison Wavetable' block.
  • Phys Model Seq --> A sequence driven with the 'Bit Sequencer' block, this block creates an 8 step sequence based on each binary 'bit' of an 8 bit input value, this input value is set using the 'Fader' block connected to it. This sequence triggers the "Physical Modelling Synth" block, as well as triggering a 'Randomizer' block which is used to randomly modulate the synth's controls.
  • Seq Seg Example --> Another example of using the 'Seq Segment' block, this one also uses the 'MOD' and 'SLIDE' controls of the block. The 'MOD' and 'SLIDE' controls are simply values sent out from their corresponding ports whenever the segment is playing (when the segment isn't playing a value of zero is sent from these ports). "Mod" & "Slide" are simply names that suggest possible uses for these ports but they are both working in exactly the same way, simply outputting values and can be connected to control anything you want.
  • Trigger Effects --> This rack makes use of the 'Knob Bank' block. This block has 4 banks of 6 knobs but only displays 6 knobs at a time. The 4 banks are used to control the parameters of 4 different effects. You can also MIDI learn the 6 knobs to 6 knobs on a MIDI controller to jam with the patch. Trigger the effects using the buttons on the 'Trigger' block (you can also MIDI learn these buttons).
  • Woody PD Sound --> Uses the exciter envelope to create a short sound that 'excites' the resonance of the "Comb & Notch" block.
📝 Reply
Topic:
Post Reply

Welcome to the Gearspace Pro Audio Community!

Registration benefits include:
  • The ability to reply to and create new discussions
  • Access to members-only giveaways & competitions
  • Interact with VIP industry experts in our guest Q&As
  • Access to members-only sub forum discussions
  • Access to members-only Chat Room
  • Get INSTANT ACCESS to the world's best private pro audio Classifieds for only USD $20/year
  • Promote your eBay auctions and Reverb.com listings for free
  • Remove this message!
You need an account to post a reply. Create a username and password below and an account will be created and your post entered.


 
 
Slide to join now Processing…

Forum Jump
Forum Jump