The No.1 Website for Pro Audio
STC-8 question
Old 20th August 2009 | Show parent
  #61
Lives for gear
 
1 Review written
🎧 15 years
Quote:
Originally Posted by 24-96 Mastering ➡️
If you haven't done so, change the internal jumper to the 'milder' version of KI. The factory setting isn't really that usable for mastering. In its milder setting, I find KI very useful on the right material, especially when using the STC for punch / groove / bounce.
It's just me again with my stc-8 madness. But I finally got one today, and I'm keeping it this time!

Robin, you're a genius. I switched that jumper like you said, and it's way nicer. I didn't bother to do that before I sent it back, but now I can see that KI will be cool to have. It's a really nice compressor!

Mychal
Old 20th August 2009 | Show parent
  #62
kjg
Lives for gear
 
🎧 10 years
Quote:
Originally Posted by Peakly ➡️
It's just me again with my stc-8 madness. But I finally got one today, and I'm keeping it this time!
congratulations on the new baby, you slut!
Old 20th August 2009 | Show parent
  #63
Lives for gear
 
1 Review written
🎧 15 years
Quote:
Originally Posted by kjg ➡️
congratulations on the new baby, you slut!
Ha! First time I've been called that, at least in reference to gear. Do people hot plug these things, or is it better to turn it off? I really want it to last a long time because it's so nice.

Mychal


Edit: tech support at Crane Song emailed me that it's ok to plug in and out of it while it's on.
Old 7th October 2009 | Show parent
  #64
Lives for gear
 
1 Review written
🎧 15 years
knobs

I know, enough already with my stc-8! But my wife was really nice to me and bought me some new knobs for it. We got them from State Electronics, and they were super nice to deal with. The knobs are metal, and they feel good - they have a nice weight. The tone is just a touch darker now, but it still has that classic stc-8 sound.

Old 16th December 2009 | Show parent
  #65
Lives for gear
 
engmix's Avatar
I now see what the STC-8 hype is all about. I had a pair of Trakkers for a while, quite honestly was really hesitant to trade them for an STC-8, because the Trakkers are fantastic. But, i really needed a transparent bus comp to compliment my colored comps. The Trakkers were a little to colored and sometimes a little nervous sounding on certain material.

Some have said that the STC-8 is boring, well, i guess if you want it to do what an 1176 does, yes, then i could see that. If you need a mix bus comp to focus the groove, tame some fly away low end issues, lift some gain, i have to say the STC-8 really is a powerhouse.

Also, many say the Limiter as unusable. I could see how that could be the case if you go to far, which can happen seriously quick. But, when i use it, i barely use it, every now and then the light hardly flashes, and i really don't hear it clamping down. I have always thought that the meters on a lot of gear is suspect at best. This Limiter is kicking in without even seeing the meters flash.

Also, the KI setting is going to be fun for mixing. I don't think i would use it on the 2 bus though. Unless I have a track up that's just blistering with top end.

This one's a keeper.
Old 17th December 2009
  #66
Lives for gear
 
🎧 10 years
Quote:
Originally Posted by Peakly ➡️
I want a nice comp on the bus after my 8200. I'd like something controlling but cool - like a strict teacher but she's hot. Seriously, I'm thinking I would probably like the STC-8. Does it have nice gain? I need some gain, and I'm hoping I don't have to lose any width either. I can only afford to buy one comp, I don't have the luxury of having several models like a lot of you cats.

Mychal
8200 has fat "straight into your face" equalization. STC-8 has more delicate sound, they might not fully complement each other in terms of sound. I think it could be better idea to add the other compressor... maybe also the GML, I haven't demoed it however.
Old 17th December 2009 | Show parent
  #67
Lives for gear
 
1 Review written
🎧 15 years
Quote:
Originally Posted by engmix ➡️
I now see what the STC-8 hype is all about.
Me too. It's sweet. What I didn't plan on was how much I would use it for tracking. But I love it for that - vocals, bass, drums, even piano. It's subtle, but definitely there. And on the mix bus I like it when the meters are barely moving. It's a great comp.



Quote:
8200 has fat "straight into your face" equalization. STC-8 has more delicate sound, they might not fully complement each other in terms of sound.
I've had the two together now for several months, and for me at least, they are a nice couple. To me, the stc-8 doesn't sound delicate. It's subtle for sure, but I wouldn't call the sound of it delicate. It's just - well, nice and full and good!


Mychal
Old 17th December 2009 | Show parent
  #68
Lives for gear
 
🎧 10 years
Quote:
Originally Posted by Peakly ➡️
To me, the stc-8 doesn't sound delicate. It's subtle for sure, but I wouldn't call the sound of it delicate.
Ok, more subtle than the GML + it has own very subtle color while GML has not. I'm not sure if they're fully complementing each other, but I'm sure in many cases they really are.
Old 17th December 2009 | Show parent
  #69
Lives for gear
 
inlinenl's Avatar
 
Verified Member
3 Reviews written
🎧 15 years
Quote:
Originally Posted by Peakly ➡️
I know, enough already with my stc-8! But my wife was really nice to me and bought me some new knobs for it. We got them from State Electronics, and they were super nice to deal with. The knobs are metal, and they feel good - they have a nice weight. The tone is just a touch darker now, but it still has that classic stc-8 sound.

nice looking knobs !!!!
Old 4 weeks ago | Show parent
  #70
Gear Nut
 
OTRM's Avatar
Quote:
Originally Posted by Peakly ➡️
I know, enough already with my stc-8! But my wife was really nice to me and bought me some new knobs for it. We got them from State Electronics, and they were super nice to deal with. The knobs are metal, and they feel good - they have a nice weight. The tone is just a touch darker now, but it still has that classic stc-8 sound.

In the true spirit of Ressurection season:
Hey, Peakly.......Just wanted to let you know that I copied your STC-8 settings from the pic above for a project I was working on and.......OMG!!! That's absolutely THE MOST transparent compression I've ever heard in all my audio days!!! Thanks for the free tip!! <g>

Cool knobs, btw....
Old 4 weeks ago | Show parent
  #71
Gear Nut
 
OTRM's Avatar
I do have a serious question:

Been looking at the STC-8 alot lately and just picked up a used one (STC-8/M). Can't wait to hear (or not hear) it.

I'm noticing while looking at pix that some units have "STC-8" printed on the left side of the faceplate while other have it printed on the right side. Does this designate a difference in the model in some way (like maybe /M, /H or standard vs)? I've looked up pix (supposedly) of /M models and have seen it printed both ways in various pix.

Maybe it distinguishes between earlier and later manufactured units? Maybe doesn't mean anything at all....?

Anyone know about this?
thnx
📝 Reply

Similar Threads

Thread / Thread Starter Replies / Views Last Post
replies: 87 views: 43045
Avatar for 12tone
12tone 4th May 2017
replies: 67 views: 8635
Avatar for finetuner
finetuner 17th July 2010
replies: 93 views: 22397
Avatar for coso
coso 3 weeks ago
replies: 28182 views: 2963927
Avatar for osterhazy
osterhazy 25 minutes ago
Post Reply

Welcome to the Gearspace Pro Audio Community!

Registration benefits include:
  • The ability to reply to and create new discussions
  • Access to members-only giveaways & competitions
  • Interact with VIP industry experts in our guest Q&As
  • Access to members-only sub forum discussions
  • Access to members-only Chat Room
  • Get INSTANT ACCESS to the world's best private pro audio Classifieds for only USD $20/year
  • Promote your eBay auctions and Reverb.com listings for free
  • Remove this message!
You need an account to post a reply. Create a username and password below and an account will be created and your post entered.


 
 
Slide to join now Processing…

Forum Jump
Forum Jump