Quantcast
recommendations for devices to switch between different sets of monitors... - Gearspace.com
The No.1 Website for Pro Audio
recommendations for devices to switch between different sets of monitors...
Old 15th March 2003
  #1
Lives for gear
 
guittarzzan's Avatar
 
๐ŸŽง 15 years
recommendations for devices to switch between different sets of monitors...

Hi, I am curious what some of you guys use to switch between your different monitors when mixing to a/b/c your mixes. I know Radio Shack sells a basic speaker switcher, but from looking at it, I don't think that would be a wise choice. I don't need something that can handle a ton of speakers, just maybe 3 sets. Also, I don't have tons to spend so if you're using the Titanium Super Ultra Audio Switcheroo Supreme with the gold plated option, that probably isn't within my realm of possibilities. Maybe $ 200 or less is more in my ball park.
Thanks,
Steve
Old 15th March 2003
  #2
Lives for gear
 
bassmac's Avatar
 
๐ŸŽง 15 years
I use this. - cheap and easy.

Old 15th March 2003
  #3
Motown legend
 
Bob Olhsson's Avatar
 
๐ŸŽง 15 years
The way most studios do it is separate power amps for each set of speakers because most speaker switches screw up the sound.

For the Quicksilver Messenger Service studio I simply used a pair of brand new SPDT (aka "three way") wall switches to switch the hot leads between two sets of speakers that had the common wired to both pairs. They need to be new so the contacts won't have ever arced on regular line current. You also don't want mercury, just copper!
Old 15th March 2003
  #4
Gear Addict
 
Curious G's Avatar
 
๐ŸŽง 15 years
I also use the Coleman LS3 and am happy with it.
Old 15th March 2003
  #5
Founder
 
Jules's Avatar
"several amplifiers (or active speakers) that you would like send a common line level signal."

Please advise on that, thanks

BTW I also need an 'off' or to "nowhere" 3rd switching option on the device..

Jules
Old 15th March 2003
  #6
Lives for gear
 
Tim L's Avatar
 
๐ŸŽง 15 years
Bryston makes one for about $250 (Click me baby!). I've read some pretty good things about it over on r.a.p.

Proco makes one that goes for around $130(?) but I'm not sure. Yea baby, click me again!
Old 15th March 2003
  #7
Lives for gear
 
bassmac's Avatar
 
๐ŸŽง 15 years
Quote:
Originally posted by Jules
I also need an 'off' or to "nowhere" 3rd switching option on the device..
Jules, The Colemanโ€™s switches are on/off - so yes, โ€œnowhereโ€ is an option.

Old 16th March 2003
  #8
Lives for gear
 
hollywood_steve's Avatar
 
๐ŸŽง 15 years
monitor switch

We chose the ProCo Switchwitch and it has worked out very nicely. It takes the incoming live level send from the console and provides 4 balanced, transformer isolated sends, each with their own On/Off switch. This setup allows a mix of active/passive monitor systems. Switch #1 controls my Hafler/Tannoy system while switch #2 controls my partner's active Blue Sky monitors.

And while our console already provides us with all of the live room / auxillary sends we need, any remaining sends on the Switchwitch can be used for whatever purpose you might come up with. And it's a rackmount unit, which is worth a few extra bucks, to us anyway.

here's a link:

http://www.procosound.com/downloads/...ets/switch.pdf

I think the "street" price is around $185

steve
[email protected]
Old 16th March 2003
  #9
Lives for gear
 
guittarzzan's Avatar
 
๐ŸŽง 15 years
Hi, thanks for the replies. I'm referring to the use of several different powered monitors. For me, a moderate noob, powered monitors are just an easier way to go. I just need a basic speaker/monitor switcher that won't degrade the signal so I am mixing what is actually there.
Thanks again,

Steve
Old 16th March 2003
  #10
Founder
 
Jules's Avatar
active speakers that you would like send a common line level signal."

Please advise on that, thanks

BTW I also need an 'off' or to "nowhere" 3rd switching option on the device.

--------

- Can I just pick one up from a hi fi shop or what?
Old 16th March 2003
  #11
Lives for gear
 
Mike Jasper's Avatar
 
1 Review written
๐ŸŽง 15 years
I use a Coleman M3. Not so cheap, but it works great. Four input sources, three speaker outs.

My only knock is that it would be nice if you could run simultaneous outputs -- one to the monitors, another to the headphone mix, for example.

Jasper
Old 17th March 2003
  #12
Here for the gear
 
efex's Avatar
 
๐ŸŽง 15 years
so I will have 2 pairs powered monitors, each getting +4db from a passive line level switch. I'd also like to be able to run a -10 send to a consumer amp which drives my cheapo surround setup. Is there some easy way to have the third output converted to -10?

electronic dolt needs to know..
Old 17th March 2003
  #13
Lives for gear
 
88fingerz's Avatar
 
๐ŸŽง 15 years
Hi!

Try these guys...haven't yet myself but looks interesting!

http://www.goldpt.com/vcb.html
Old 18th March 2003
  #14
Gear Nut
 
heartsoffire's Avatar
 
๐ŸŽง 15 years
I use a ProCo Switch (referred above) to control a pair of Mackie HR824s and a pair of Event PS8s. Real clean and simple with balanced connections. Roughly $250 US.
Old 11th December 2005 | Show parent
  #15
Lives for gear
 
Greg B's Avatar
Presonus Central Station

I run my DAC1 into the Presonus Central Station. It makes it very easy to switch between three pairs of monitors, or two pairs and a sub.

It's also nice to have the talkback button and headphone outputs.
Old 11th December 2005 | Show parent
  #16
Gear Maniac
 
iziphonics's Avatar
 
๐ŸŽง 15 years
Makie's Big Knob?
Old 11th December 2005 | Show parent
  #17
Lives for gear
 
zimv20's Avatar
 
๐ŸŽง 15 years
guys, this thread's over 2 1/2 years old.
๐Ÿ“ Reply

Similar Threads

Thread / Thread Starter Replies / Views Last Post
replies: 51 views: 8499
Avatar for NuSkoolTone
NuSkoolTone 30th January 2007
replies: 163 views: 14320
Avatar for Ethan Winer
Ethan Winer 4th February 2009
replies: 0 views: 1847
Avatar for gregory
gregory 18th December 2008
replies: 1037 views: 295039
Avatar for catchthehare
catchthehare 2 weeks ago
Post Reply

Welcome to the Gearspace Pro Audio Community!

Registration benefits include:
  • The ability to reply to and create new discussions
  • Access to members-only giveaways & competitions
  • Interact with VIP industry experts in our guest Q&As
  • Access to members-only sub forum discussions
  • Access to members-only Chat Room
  • Get INSTANT ACCESS to the world's best private pro audio Classifieds for only USD $20/year
  • Promote your eBay auctions and Reverb.com listings for free
  • Remove this message!
You need an account to post a reply. Create a username and password below and an account will be created and your post entered.


 
 
Slide to join now Processing…

Forum Jump
Forum Jump