Hey all, hope to get some tech support. I am dialing in my JH-100 Transport, I had it running great till the takeup reel got a full pack and then it had a hard time moving. I found a pin on the motherboard that had crack and if you moved the PLL Board it would act up. Reflowed and got it fixed. It was going well so I started from scratch with torque board setting null, adjusted idle turns ( 3 sec per revolution) setting tension ER 170grams FR 340grams supply side then moved to take up side and now it’s working way better but at the end of reel the supply is almost empty and won’t start fast forward without a little help. Play seems a tiny sluggish but works. All IC's are in working condition Going through voltages and things look okay. Any suggestions?