Hi! There seems to be alot of talk about bass trapping on the board right now so I thought it was a good idea to post some...

My dad and I are fed up with peaks and null in the mix and tracking room in our studio. We've decided to build 24 - 2'X4'...

Today i started a project to build some quadratic residue diffusers. Overall not a difficult project--even though i used only...

Hi everyone, I've got my small studio desk set up in my finished attic. Because it's a finished attic, the dimensions are long...

Hi, i was wondering if building corner bass trap completely filled with hemp fiber of 40 kg/m^3 would work or not. Also i was...

Over the years I have had great success fixing smallish room bass problems with limp mass absorbers. As there are so many...

I am considering purchasing the Auralex hoverdeck to go under my drum set as a means to improve the sound of my drums in the...

I currently have many 3-inch thick acoustic panels in my room, mounted with a 3-inch air gap. I was just wondering if it would...

Sustainable Insulation | EcoBatt Insulation | Knauf Insulation Anyone have any experience using this Knauf product for deep...

After several threads here on the relative safety of rockwool, fiberglass, and organic fibers, I did a few days of digging...

Anyone used or own these traps or similar? The price is great but does the level of absorption suffer? Recommend or...

I plan on getting a cat (my old one died), and I'm worried they might scratch into fiberglass or roxul gobos and get toxic...

While Glenn of GIK recommends (in the GS forum) that RFZ be non-FRK, any advice on whether the other non-corner (wall and...

Hello everyone new to acoustic treatment, I need to record vocals soon in a 3.4m x 2.4m x 2.36m untreated room, on one wall a...

Our cat really loves climbing up my DIY acoustic panels. A couple of times they have come crashing down, because I'm in a rented...

I can get 4' x 2' x 2" Roxul in a 4' x 2' x 2" carboard box or 6 4' x 2' x 2" Acoustamic Eco Celullose panels...

I was wondering if anyone might have a suggestion on bass trap placement, when there is a door in one corner?

Hello, I tried to build a limp mass absorber but I didn't have much luck. This is what I did using tecsound t50 (very...

There seems to be much confusing about bass traps so I thought I would start a new thread that discusses the different types and...

I've got a bunch of corner panels to make with some with what is going to be odd angles. I got flat ceiling corners at each end...

Hi there, I will be moving house shortly and I wanted to build some acoustic panels when I move in to my new studio room. I...

Is this product okay to use for super chunk bass traps ? UltraBatt™ Insulation |...

Hello! it's my first post on gearslutz haha straight to the point, i have tiny little room that size are width : 1.8m depth...

Hi, I am going to build corner floor-to-ceiling bass traps. However I found a way to save material(rockwool) by building the trap...

Hi, In some instructions a low band bass trap is inserted behind the listening position. See e.g.:...

I'm curious to know what wood types other acoustic panel builders have chosen to keep build costs low without sacrificing...

About 15 years ago, I built some bass traps using 5" recycled denim. I basically built frames with cloth on the outside...

Hello! I'm currently building out a new rehearsal space in a large detached garage, dimensions 30' long x 33' wide x 14' high....

Hi! I´ve been fighting with my studio resonance for a couple of weeks. It´s at around 120-123hz. It´s hardest above my desk...

Hello, everyone. I have a question about Thermafiber Safing mineral wool insulation. My local big box stores didn't have any...

In the middle of doing bunch of treatment for a live room at the moment. Medium-ish sized, 4.6m wide and 7m long. Plaster on all...

I need to build some quick/easy/cheap/effective gobos for the live room. Does anyone see why this plan wouldn't work? They...

Hello all, first time post here. I was wondering if anyone had any leads on tracking down some of these (Abby Road style)...

NRC=1.37 I pretty much have a few small spots left in room for treatment, at the ceiling horizontal corners (whatever they're...

Hi, I checked several threads regarding this topics but the suppliers recommended told me they no longer carry the material. Does...

Is there any reason not to use a table saw? I want to make several hundred precise cuts relatively quickly. I found a table saw...

I just called a repairman to repair the air conditioner My diy fabric wrapped rockwool acoustic panel happened to be just below...

Hi all ! my current apartment has the most dreadful noises, I can hear the general building ventilation through the walls,...

I have a space available of roughly 6'x5'x4'. I say roughly because the 4' walls are tapered. Would it be possible to stuff...

anyone have any of the gik traps? they are FAR less in price than realtraps. what is the difference between the 2?

I'm looking to build some temporary, movable walls in my studio and was trying to understand what attenuation (in dB) I'd get...

I built over 30 panels of 6" Safe'n'Sound, covered all the walls, put large superchunks in corners, built two pairs of...

Here's the deal. Im building 4 tri corner "modular" super chunks. Each corner will be made up of four...

So I was reading other topics about closed back panels basically nullifying the benefits of an air gap. I also read that thin...

Hi everyone, I am building my first bass trap with Isover Sonepanel which is around 8000 Pa.s/m2. Am I right to understand...

Hey guys, So ive recently made the purchase of a portable vocal booth and ive been covering all edges with regards to the...

Hey guys, I'm on this site reading a lot, although I never post so I didn't need an account. I have some GIK 244's and...

Is keeping the work top of the desk as small as possible a good way to avoid/reduce desk reflections? I could go pretty small as...

Hello all, I am planning on building some panel bass traps using Rockwool in the near future, but am concerned about loose...

Hey Guys, So I'm trying to wrap my head around this subject but seem to miss something. When choosing an absorber material...

Hi gearslutz, I was browsing around and I stumbled upon a picture of a Binary Amplitude diffuser, does anyone know how to make...

Hey all, I'm gonna feel really stupid if this already exists, but here goes anyway. Can someone make a sticky thread...

I'll be going with double layer Safe'n'Sound (7") all around. Corners - full height, the rest 48". Not sure what to...